ePlum GetPictures! Printer Spy

Application to monitor and control system printers and print jobs.

• Existing Printers box shows all printer installed in your system.

  Plus sign means that this printer can be in principle controlled by ePlum GetPictures!.

  Minus sign means that this printer's jobs are inacceptable for catching. The printer may be the network one, or you may not have enough rights to control it.

  Red exclamation mark means that this printer status was affected with ePlum GetPictures!, i.e., it was set to pause.

  You can manually change any printer's status, using buttons Set to Pause and Resume.

  These manipulations may be useful, if you intend to execute 'physical' printing and getting images simultaneously.

• Selected Printer's Jobs box shows all jobs of selected printer. You can cancel any or all of them.
• Save Settings button lets you turn current printer's status to the system one. E.g., the printer will be staying in pause, but an exclamation mark will be lost. So, when you close ePlum GetPictures!, the printer will remain paused.
• Set all to default button switches to the common work regime: all printers paused while ePlum GetPictures! is running, and resume after the program closing.

Additional Information.

If you have no acceptable printers, you get the message as follows:
It means that you have no acceptable printers. See How to Install Acceptable Printer.